06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc

06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc

06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc
Pn# -HHF0601 HHF0602- FUEL LINE KIT2006-11 Chevrolet HHR 2.2L Ecotec 4CYL 3/8" Main Fuel Line&#######xA0;2006-11 Chevrolet HHR 2.2L Ecotec 4CYL 3/8" Fuel Vapor Line 1pc, OE SteelMade in the USAFull Length Fuel Lines, Return lines & Vapor Lines: The full-length Main, Fuel Line, Fuel Return Line and after 1970 The Fuel Vapor Line run the fuel length of the car or truck. The main and fuel line often run together with the main fuel line being 3/8? In most cases and the return &#######xBC;? There are some cases from 1958-69 were the fuel line is 5/16? There are also smaller size return lines of &#######xBC;? So, check you lines before ordering. An open-end wrench can be used to check the size. It will fit snug over the dia of the line. Save Us To Your Favorite Sellers.

06-11 Chevrolet HHR Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes OE 2pc. Pn# -HHF0601 HHF0602- FUEL LINE KIT. 2006-11 Chevrolet HHR 2.2L Ecotec 4CYL 3/8 Main Fuel Line&#######xA0. 2006-11 Chevrolet HHR 2.2L Ecotec 4CYL 3/8 Fuel Vapor Line 1pc, OE Steel.

Full Length Fuel Lines, Return lines & Vapor Lines. The full-length Main, Fuel Line, Fuel Return Line and after 1970 The Fuel Vapor Line run the fuel length of the car or truck. Fuel vapor lines are typically 5/16?

It is important to know what line the Main, Return, and vapor are, and which one is which. This line delivers fuel from the gas tank to the fuel pump?

It typically has a rubber hose connection at the sending unit and the fuel pump. These connections should always be replaced with new hose and we suggest fuel injections hose. It is a better quality and will not flatten or kink as easy. If you are bumping your fuel line from 5/16?

Remember that the sending unit will have to be larger and the fuel pump fitting or hose bead will have to be larger. Many cars in the 50?

S only have the main fuel line. Many fuel pumps have a return provision and the ones that don? T will have a fuel filter that has the provision. The fuel return line usually runs side by side with the main fuel line. It serves as a gas tank vent and is usually hooked to a charcoal canister at the front of the car.

This line also prevents vapor lock and heating and cooling issues in the fuel system. Some choose to leave this line off and regret it later. This line can also run with the main and the return or sometimes by its self on the opposite side of the car.

All Lines are Preformed specify for your car or truck. Your lines will come completely preformed with correct factory bends, fittings on the ends with the correct 45 deg. Double flare, or metric bubble flare ends. These lines may also have wire spring wrap, cloth wrap where on the original line.

All you must do, is bolt into place. These lines are all CNC Computer Manufactured in our state-of-the-art facility in Shelby twp. Our exclusive laser scans original lines or imports data from 3d models or blueprints and this information is down loaded to one of our 18 CNC benders to produce your lines. All flares and end forming are done on hydraulic end formers and pressure inspected for a perfect flare every time.

When it comes down to it not all parts are made the same, Inline Tube has spent countless hours to ensure that our product is 100% authentic in appearance, application and fit. The difference in our product is a perfect fit. Even with our extensive research & development we still find some cars with parts that differ from our patterns. Multiple vendors made lines for the OEM, they start and end in the same location, but the bends may be slightly different. Always remove your old lines carefully for comparison.

Once you're satisfied that the new lines match your originals, you can dispose of the old lines. If your old line is different, we may need a picture or your original line as an example of what is right for your car. Make sure the line you are comparing to is an original line. If your line has a long fitting on one end and short fitting on the other it is remade.

If the line has wave like bends and wraps around to take up the slack in the line it is remade. The original line will have crisp clean bends just like the replacement line.

If a line must be altered to fit a non-stock application, (line lock, dual master, disc brake conversion) or your application varies from our part beware, once the part is bent up, cut, and not in the original shape. WARNING: This product may expose you to chemicals which are known to the state of California to cause cancer, birth defects, or other reproductive harm.

For more information visit: p65warnings. Inline Tube offers a variety of products for all classic cars and trucks ranging from preformed brake lines, fuel lines, transmission lines, and straight length tubing sets, for custom applications and the street rod enthusiast. Our exclusive products include: stainless steel and OEM parking brake cables, brake line and fuel line clips, stainless and OEM brake flex hoses, proportioning valves, disc brake conversions, rear drum kits, exhaust and many other under body products. These lines also have correct size wire spring wrap or cloth wrap where used on the original line. Complete and ready to bolt them into place.

Countless hours and immense research has been spent to ensure that the product is 100% authentic in appearance, application and fit. Inline Tube manufactures all its own preformed lines, fittings, hoses and clamps to ensure the high quality of our product. With over 14,000 tubes in our current inventory, Inline Tube is the industry leader in computer precision preformed brake and fuel lines. Located in the heart of "Motor City" Detroit where automobiles are not just transportation, but a way of life!

Our staff consists of highly trained sales personal, technical service representatives and mechanical engineers to ensure your receive the best service, the correct information and the highest quality parts on the market. Inline Tube bends over one million feet of tube, using 350,000 tube nuts and 100,000 feet of spring wrap each year.

We are the Brake Plumbing Experts. This means we will not accept a part used on a car, greasy, damaged, bent or without the original box.

Resalable means in the same condition as you received it in. Please include pictures of the damaged product AND package in your message. Damages MUST be reported WITHIN 48 HOURS of receipt of the order. Count and confirm all items in sealed bags BEFORE opening that bag. Shortages or other issues must be reported WITHIN 48 HOURS of receipt of the order.

Inline Tube Terms & Conditions. Without limiting the foregoing, Inline Tube shall in no way be liable for loss of use or profit, or for other collateral, special or consequential damages. All content on Inline Tube's storefront designs and listing pages are copyrighted. No part of this strefront or the listings contained within may be reproduced including text, pictures or layout without written permission from Inline Tube. At Inline Tube, it is important to us to protect the privacy of your personal information. Inline Tube does not share or profit from any of your personal data. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Hoses, Lines & Pipes". The seller is "inlinetube" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
06-11 Chevrolet Hhr Metal Main Return Vapor Fuel Gas Lines Kit Set Tubes Oe 2Pc


Index   Links   Contact   Privacy Policy   Terms of service